描述

樹莓派超音波測距模組(HY-SRF05)

商品規格

Working Voltage : 5V(DC)
Static current: Less than 2mA.
Output signal: Electric frequency signal, high level 5V, low level 0V.
Sensor angle: Not more than 15 degrees.
Detection distance: 2cm-450cm.
High precision: Up to 0.2cm
Input trigger signal: 10us TTL impulse
Echo signal : output TTL PWL signal
Mode of connection:
1.VCC
2.trig(T)
3.echo(R)
4.OUT
5.GND
Use method:
Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not. The out pin of this module is used as a switching output when anti-theft module, and without the feet when ranging modules.

2 channel Logic Level Converter Description :
The logic level converter is a small PCB which safely allows you to interface devices which steps down 5V signals to 3.3V signals and step up 3.3V signals to 5V.
The converter has 2,  inputs and outputs and can be used with I2C, SPI, UART, etc.
The board needs to be powered via two sources, 5V and 3.3V and your data lines are linked via pins 1 to 2 on each side so an input on pin 1 will be converted to the lower or higher output on the adjoining pin 1

相關文件

Sonic.7z

商品內容

1x Rs-Pi Logic Level Converter (2 channel x1 )

2x 2.54mm pitch

1×4 header

1x HY-SRF05 ultrasonic sensor module

8x 20cm male to male cable

1x Manual